home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.cbm
- Path: istar.net!infoshare!whome!gts!feline!torfree!ae677
- From: ae677@torfree.net (Ken Bonnett)
- Subject: Re: Buscard III Clip
- Message-ID: <DKuDzD.6uz.0.queen@torfree.net>
- Organization: Toronto Free-Net
- X-Newsreader: TIN [version 1.2 PL2]
- References: <DKpvuo.CFu@novice.uwaterloo.ca>
- Date: Mon, 8 Jan 1996 03:06:49 GMT
-
- David Evans (dfevans@bbcr.uwaterloo.ca) wrote:
- : I have a Buscard III with no manual, and am wondering where the clip
- : thingie should be attached.
-
- I didn't know there was a BusCard III.
- Excerpt from BusCard II manual, installing section ...
-
- Just left of the centre line of the computer board and about
- half way back is a cylinderical device (resistor) labelled R44.
- Locate this and clip the connector on the supplied cable to the
- right (or bottom) end of the resistor. For best connection hook
- the clip under the resistor lead from front to back and lay the
- clip down toward the front of the computer.
-
- ... followed by two photos that make sense of the above.
-
-
-
- --
-